CARGANDO IMAGENES
Imagen no disponible
SERVA

SERVA Dryer Frame Kit

Código: SE-4252301 | Marca: SERVA

Stock: 

Artículo disponible | Stock mínimo| Consultar por disponibilidad

Sin Stock

SERVA Gel Dryer Frame Kit contains 2 dryer frames and 200 cellophane sheets.

The dryer frame consists of three main parts: a bottom plate, a frame and 4 white clamps to fix the frame on the bottom plate.

How to use the kit for gel drying:
-After staining the vertical mini gel, the gel is incubated in preservation solution (30 % (v/v) ethanol, 5 % (w/v) glycerol) over night.
-Immerse one sheet of cellophane at a time in the preservation solution, making sure to cover both sides of the sheet with solution. Allow 15-20 seconds for complete wetting before adding additional sheets.
-Place one soaked sheet on the bottom plate.
-Lay the gel in the middle of the cellophane sheet making sure no bubbles are trapped between the gel and the cellophane. Add some preservation solution to the surface of the cellophane, if necessary.
-Carefully place the second sheet of cellophane over the gel, again without trapping any air-bubbles between the cellophane and the gel. Add some preservation solution to the surface of the cellophane, if necessary.
-Gently smooth out any wrinkles in the assembly with a gloved hand.
-Align the remaining frame so that it fits on the bottom plate.
-Push the plastic clamps onto the four edges of the frames.
-Lift the frame assembly and pour off the excess solution.
TAMBIÉN LE PUEDE INTERESAR
Imagen no disponible

Realice aquí su consulta

Instrumentos y equipamiento para laboratorio analítico | Electroforesis 2D | Reactivos de Biología Molecular | Reactivos y Medios

  Las imágenes son de carácter ilustrativo. Última Actualización: 29/03/2024 1:40